This menu allows the selection of one of the markers and changing the attributes or position of a marker.
- MARKER x is used to select one of four markers
- DELTA x set the currently selected marker as delta marker and selects the reference marker to use
- NOISE sets the currently selected marker as a noise marker. This will change the level display to "/Hz" and subtract the impact of the selected RBW
- TRACKING sets the currently selected marker as a tracking marker which enables automatic positioning of the marker at the strongest signal.
- TRACE x selects the trace on which to position the currently selected marker. If the trace is not displayed the marker will also be not displayed
- TRACE AVERAGE sets the currently selected marker to display the average level over the total trace. This can be used in zero span measurements to see the average level over the total sweep time
- SEARCH activates a sub menu for searching minima or maximum or for entering the frequency where to position the marker.
- DELETE deactivates the currently selected marker
- BACK returns to the marker menu
