Recent Changes - Search:


edit SideBar


Welcome to the tinySAtm wiki!

The tinySA is a small spectrum analyzer, primarily intended for 0.1MHz to 350MHz input but it has some nice other capabilities:

  • Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz.
  • Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz
  • Color display showing 290 scan points covering up to the full low or high frequency range.
  • Input Step attenuator from 0dB to 31dB for the MF/HF/VHF input.
  • When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz.
  • A built-in calibration signal generator that is used for automatic self test and low input calibration.
  • Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer
  • Rechargeable battery allowing a minimum of at least 2 hours portable use
  • Due to the low cost and very small form factor there are certain relevant limitations.

Introduction video

A short 7 minute video introducing the main features of the tinySA can be found here

Main subjects covered in this wiki:

The name tinySA and the tinySA logo is a trademark owned by us. Nobody else is allowed to use the name tinySA for any spectrum analyzer product without written permission.

Edit - History - Print - Recent Changes - Search
Page last modified on July 27, 2020, at 06:18 AM