• View
• Edit
• History
• Print

Best performance settings

The tinySA Ultra has many many settings. In general one should NOT make changes to settings that are not fully understood. In the ultra mode a number of settings MUST be in AUTO mode (indicated with the letter 'A' inside the checkbox.)

• SPUR REMOVAL
• IF FREQ
• MIXER DRIVE
• SCAN SPEED
• BELOW IF
• HARMONIC must be set to '3'

In case of doubt reset to factory setting using PRESET/STORE/FACTORY DEFAULTS and PRESET/LOAD STARTUP

The DISPLAY/SWEEP SETTINGS/FAST mode does not work as intended. Avoid using this mode.

Do not change the AGC and LNA setting in the expert config menu