Recent Changes - Search:

edit SideBar

Measurement Menu

The measurement menu provides quick presets and data entering for certain types of measurements.

  • OFF switches off any measurement related setting and behavior and returns the tinySA to regular operation
  • HARMONIC switches to a marker configuration for measuring the level of harmonics of a signal
  • OIP3 switches to a marker configuration for measuring the Output IP3 level of a signal
  • PHASE NOISE switches to a marker configuration for measuring phase noise of a signal
  • SNR sets three markers, a tracking marker and two delta markers at the specified distance to the tracking marker
  • -3dB WIDTH sets three markers, a tracking marker and two delta markers at the -3dB levels versus the tracking marker and the delta frequency of the two delta markers is calculated
  • OCCUPIED WIDTH requests a dBc level and continuously measures the occupied bandwidth of the displayed strongest signal at the specified dBc level
  • AM sets various settings to optimize observation of an AM modulated signal
  • FM sets various settings to optimize observation of an FM modulated signal
  • THD enables measurement of the Total Harmonic Distortion, defined as the percentage of energy in the harmonics versus the energy in the fundamental as visible in the scan
  • CHANNEL POWER enables ACP and channel power measurement. The span is divided in three channels of equal width with the channel of interest in the center. Above each channel the channel power and channel width are shown, below it the percentage of the total power and for the two side channels their power relative to the center channel in dBc, the adjacent channel power ratio. The console command channel returns the three channel powers.
  • LINEAR steps the internal attenuator through all attenuation levels and draws a green line showing the measured maximum level for each attenuation setting
  • BACK moves back to the input menu
Edit - History - Print - Recent Changes - Search
Page last modified on November 10, 2026, at 06:26 AM