There is a short video demonstrating the trace menu
- TRACE x selects the trace to act on. One of four traces can be selected.
- ENABLE enables the display of the selected trace
- FREEZE holds the updating of the selected trace. This is used to create static traces
- CALC selects various calculation options over time such as averaging or max hold.
- NORMALIZE stores the current trace in trace 3 as a reference and subtract trace 3 from the currently selected trace. It is not possible to normalize trace 3.
- SUBTRACT enables the selection of a trace to subtract from the currently selected trace. It is not possible to select the currently selected trace for subtraction.
- TRACE->TRACE copies the current trace data to another trace. It is not possible to copy a trace to itself
- TRACE->SD writes the current trace data to the inserted SD card
- SD->TRACE reads a trace from SD and stores into a frozen trace.
- BACK returns to the input menu
