The mode menu allows switching to one of the operating modes of the tinySA and to activate the calibration output. Switching mode will reset all users settings to the default values for the selected mode. Returning to a currently active mode will not changes any settings.
- Spectrum Analyzer activates spectrum analyzer mode
- Signal Generator activates the signal generator mode
- CAL OUTPUT controls the build in calibration reference generator. The output of the reference generator is connected to CAL connector. The output frequency can be 1,2,4,10,15 and 30MHz and the output level of the fundamental at 30MHz is -35.6dBm
- BACK returns to the current active mode.